Automotive Technician
The automotive industry is at the cutting edge of technology and there is a great demand for highly trained, customer-oriented auto technicians. Skills in automotive technology, diagnosis and repair open the doors to a multitude of jobs throughout the state and nation.
Occupations in this area:
For state and national occupation information, visit O*Net and enter the following code(s):
- 49-3023-.01 Automotive Master Mechanics
- 49-3023-.02 Automotive Specialty Technicians
* The U.S. Education Department now requires institutions to provide Gainful Employment information to prospective students that provide consumer information on program costs, student debt and completion. The above Career & Program information will provide a comparison between similar programs at different institutions
Contact us:
For more information about this program, please contact us at SATTS@slcc.edu.
- To contact an academic advisor, career advisor or faculty member, please see the appropriate tab on the left.
FAQ
- Maintenance and Light Repair
- Brakes, suspension, steering and alignment
- Electrical/electronic systems
- Fuel Injection/drivability
- Emission controls
- Heating and air-conditioning
- Automotive engines
- Transmission and drive train systems
- Diagnostics and review
- 1/4 Inch Drive - Standard and Metric with Extensions and Ratchet
- 3/16 to 9/16 standard depth
- 3/16 to 9/16 deep or extended depth
- 5 mm to 15 mm standard depth
- 5 mm to 15 mm deep or extended depth
- 3/8 inch Drive - Standard and Metric with Extensions and Ratchet
- 5/16 to 7/8 standard depth
- 3/8 to 7/8 deep or extended depth
- 8 mm to 19 mm standard depth
- 8 mm to 19 mm deep or extended depth
- 1/2 Inch Drive - Standard and Metric with Extensions and Ratchet and Breaker Bar
- 3/8 to 1 1/8 standard depth
- 3/8 to 1 1/8 deep or extended depth
- 12 mm to 24 mm standard depth
- 1/4 and 3/8 drive torx socket driver sets
- T8 to T25 and T27 to T60
- 3/8 hex drive set
- 1/8 to 3/8
- 3/8 metric hex drive set
- 4 mm to 10 mm
- Combination wrench set standard 3/8 to 1"
- Combination wrench set metric 9 mm to 21 mm
- Flare nut wrench set 3/8 to 13/16
- Flare nut wrench set 9 mm to 21 mm
- Adjustable wrench 12"
- 1/4" flat tip stubby
- 3/16", 1/4", 5/16", 3/8" flat tip
- #2 Phillips, stubby
- #1, #2, #3 Phillips tip
- Needle nose
- Adjustable joint
- Slip joint
- Locking
- Locking needle nose
- Retaining ring convertible
- 3/16 center punch
- 3/32, 5/32, 3/16 pin punches
- 3/32, 5/32 starter punches
- 3/8, 1/2, 5/8 flat chisels
- 20 oz. Ball Peen
- 32 oz dead blow
- 22 oz brass
- 16" heal, line-up tool
- 24" flat chisel w/handle
- Claw type pick up tool
- Inspection mirror
- Magnetic pick up tool
- Gasket scraper
- Metal ruler 1/32 graduated 6"
- Tape rule 6'
- Circuit tester 12 v
- Hand scratch brush
- Steel cup brush 1"
- Flashlight
- Feeler gauges
- Safety Glasses Polycarbonate w/side Shields OSHA approved
- Ear protection
- Hacksaw w/blades
- Valve core/stem tool
- Brake adjustment tool
- Brake return spring tool
- Brake hold down spring tool
- Tire pressure gauge
- Tire tread depth gauge
- DVOM, high impedance 10a fused A/C coupled
- Soldering iron or gun
- Tool storage box
- In addition to the standard tool list above, it is recommended that each student also provide a set of five jumper leads.
Tuition and Fees
Available Class Schedules
Financial Aid
- Types of Financial Aid
- SLCC Scholarships and Tuition Waivers
- Non-SLCC Scholarships
- SkillsUSA Tuition Waiver